How to mount a TV on a VESA wall mount. Demonstration with a Vogel’s WALL 2305. Tools required: a bubble level, a tape measure, a drill, screw anchors, a hammer, a pencil and a screwdriver. For installation on Placoplatre BA13: screw fasteners (Molly) and a pair of expanding pliers is recommended. Step 1: Lay the TV face down on the floor and locate the VESA mounts. Step 2: Place both of the wall mount’s brackets on the back of the TV. Step 3: Insert the four screws. The procedure is the same for the rest of the screws. Step 4: Trace a perfectly horizontal line on the wall. This line is going to be used to fix the fastening rail onto the wall. Its position depends on the height at which you wish to install your television. We recommend positioning the bottom of the television at eye level. Step 5: Trace an “X” where you will drill holes for the screws. Step 6: Drill the holes. Step 7: Put the Molly bolts in place, then use the expansion pliers to secure them tightly. Step 8: Screw the fastening rail onto the wall. Step 9: Place the television on the fastening rail. It’s possible to slide the television to the right or left to center it on the wall mount.