Hello! Back in February, I was in contact with these chic hemp lights from shroom in the room. They are magical, charming, stunning, generally unusual. And, of course, I wanted to do this. This translation is done automatically. if you find a mistake, please correct it in the subtitle settings I repeat, and it is very important to note, the idea is not mine. I just figured out how to do this thing myself. And on that score, I would like to ask you one question, but it will be at the end of Viedo, now I just do not want to distract you from watching The process of creating this little string. Hemp was needed for stubs. But I, naturally, could not cut the tree, and the whole process of work stalled on it. But then I went home and saw a tree that fell after a hurricane, and I saw it at that very moment When the wipers had already cut it, but no one had taken it away yet. And there was a polishka well, just the perfect size! Well, what am I, I took. I carry, I think, not thick. I go another time, the tree is still lying, and there was such a log, it was just perfect, but I did not take it for the first time, since it was still too big. But then it did not stop me. Nah And here I am all so beautiful-made-up, in heels, trying to get this log. Then it had to be cut. It turned out to be not as easy as I thought, because the saw was squeezing, and in general it was still a log, so my father helped me. I had such a lantern from FixPrice, I still saw these in Leroy Merlin and on Ali. He must go inside the log. I traced the outline and then I had to cut it out. I originally planned to drill holes with a drill and then remove it with a wood cutter, as I did in the log for a yule but the tree was still raw, it did not even want to give in to drills specifically for wood The chisel also did not help much at first, but then I took a rounded cutter and it went. Then I realized that hemp needed emphasis, and then my grandfather suggested that it’s better not to knock on the workbench, but on the stump, and things really went faster. I got such a rosette inside and I had to horizontally chop this mini wooden forest inside the stump, for this I took the Dremel I first took the grinder, and now I really do not remember why I first took it, because the effect of it is very small. But then I found the benefit of such a sawing disc and cleaned all the excess inside. Then I decided that this cavity should be deeper and alternated the work with a cutter and a chisel, creating such a forest inside, then hemming it all with a smooth Dremel, because the walls of the stump did not allow me to approach chisel and cutter so that everything is clean inside. Then I polished everything inside the walls. And on top, too, walked his new grinder It turns out just well, incredibly smoothly, and this is how the lantern should be removed. Further crystals. In the original, by all appearances, real natural stones are used, but I don’t have them, but I’m not so interested either. Therefore, those who have been watching my channel for a long time already know perfectly well what material I will undertake. I knead the epoxy resin, and while the bubbles come out of it, I began to prepare the forms. I once saw a technique on the Internet, when they rub the form itself with a rub-in for the nails, then it is poured, and rubbing remains on the finished product. I bought three such mother-of-pearl colors and in this case I decided to use pink. To me in the video about the summer collection, where I first tried rubbing nails while creating jewelry, advised to put them here with such a sponge for the shadows and it turns out, really, very well. So I painted all the facets of future crystals, and then poured them with resin. And I poured a bit too much resin, there were still bubbles in it, but then it would give a very interesting effect. I poured to the end not all forms, so that the crystals turned out different sizes later. When they froze, I take them out, and unfortunately, for some reason I don’t have any water and oil that you have advised, for some reason it does not help, but since I’m not pouring these crystals in the first time, it was easier to remove the products. I twist them, and then press them down to the crystal squeezed due to the fact that the walls will return to its place. Rubbing gave a bombing effect. And the bubbles gradually came out when the crystal was upside down in the form, and now, on the contrary, they seem to soar upwards, in my opinion it looks quite interesting. I decided to slightly cut them from below so that I could stick them at an angle.
And she began to stick The light passes through them smartly.
Next you have to immerse it all in a stump. I still overdid it, and made a rather deep bottom under the lamp, so I had to make such a pod I do not really need wooden pieces. At that moment I simply did not find anything else more unnecessary. Not so long ago I was in the mood of “just throwing everything up” And sawn plywood, just the same that lay with me for quite a long time fell under the hot hand. At the junction of the crystals and lanterns, I poured some UV resin and dried it, for these purposes, by the way, she approached normally. And then you need to decorate everything with moss. I bought this one in Leonardo, and I thought it would be very small, but when I straightened it, it turned out to be ideal for such purposes. At first I began to glue it on the glue moment, but then I decided to take a glue gun, and this turned out to be the right decision. I tried to make it possible in the future to take out the middle part with crystals and a flashlight, to change the batteries if necessary. That is, I separately pasted the moss on the lantern and separately in a circle. Another good thing is that moss can cover all the shortcomings. For example, how I crookedly at first began to cut the stump. This is how I did it and the sticks that got caught in the package with moss, I also decided to glue, with them it looks more natural. I also had these bumps that the subscriber sent me, even when I was in France, one bump was with a very strange branch, I broke it off, and another box of that package was a mushroom, which I also decided to use. By the way, an interesting point, there is a spider web from the glue of the gun, and this is exactly the case when it can be not removed, because it looks really like a cobweb and fits very well with this entourage. And now a question that still does not leave me alone and I am interested in your opinion on this matter. I, like many, periodically watch the works of various masters on Pinereste, on Instagram, VKontakte, and due to their accumulated experience in the world of crafting and handmade From time to time I can understand how this or that thing was done. Well, like for example in the case of this stump. Is it good that I tell the whole Internet, What do I think about how it was done, or how did I do the same thing? Not in relation to you, to you, of course, this is interesting, but in relation to these masters, for example. I do not do it for sale, but at the same time it cannot be downloaded, which I do not extract from this commercial benefit, because for the video I get a pretty penny. And even if it is not about money, but if I saw the thing and understood how it was done, is it normal that I will talk about it? It’s an alien idea. But at the same time, I myself understood how this was done, but I did not go there for some kind of secret super paid workshops And then on the whole Internet I’m telling you about this, this is the question I’ve downloaded I hope this video was interesting and useful for you. I love you so much. Until.